BISON -50 Hydraulic car winch 22680kg

Bison 50

• Powered by a PTO (power take off unit) driven pump with variable recovery speeds for high working rate
• 251.8 cm³/rev highly efficient and constant operating torque motor with 22,680 kg / 50,000 lb capacity
• Hardened 2 stage planetary gear train with 44:1 gear ratio provides faster line speed
• Built-in air clutch for rapid wire rope payout
• The Multi-Disc Brake ( MDB ) patented for holding full load
• Great for severe duty trailers, roll-back carriers, and commercial recovery application
• Roller fairlead, cable tensioner and two ways counterbalance valve supplied
• Meet SAE J706 , CE machinery directive 2006/42/EC

• Part number: PN 685010 (Std. drum)
• Rated line pull: 22,680 kg / 50,000 lb (SAE J706 rating)
• Line speed (at 1st layer of rope) : 5.7 mpm at 100 l/min (19 fpm at 26.5 g/min)
• Operation pressure: 200 bar / 2,900 psi
• Max oil flow: 100 l/min (26.5 g/min)
• Hydraulic motor: 251.8 cm3/rev (15.4 in3/rev)
• Gear ratio: 2-stage planetary gear 44:1
• Winch construction: Cast housings with steel drum
• Clutch (Freespooling): Output shaft disengaged
• Brake: Multi-Disc Brake (MDB) patented and counterbalance valve supplied
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 180 mm (7.1″)
• Drum flange diameter: 406 mm (16”)
• Distance between flanges: 368 mm (14.5″)
• Mounting bolts pattern:  240 x 453 mm (13.4” x 17.8”) ; 340 x 453 mm (13.4” x 17.8″)
• Wire rope recommended:
  22.4 mm x 48 m (7/8” x 157’) 1,770 N/mm2 (EIPS) breaking strength of 305 kN (68,442 lbf) required for SAE J706 ratings
• Winch weight: 375 kg / 827 lb
• Gross weight: 410 kg / 904 lb
• Box dimension, (L x D x H) : 1,170 x 630 x 670 mm (46″ x 24.8″ x 26.4″)

Does this device not quite meet your needs? Discover our entire range of  our products  here in the shop! 

Do you have questions about this product? Please contact us! Call us on:  00302105130003 or send us an email to  info@kapountalis.com