HV-8000 Hydraulic car winch 3630kg

Hydraulic winch HV-8000 for 3630kg

• Part number: PN 680816 (Std. drum)  / PN 681091 (Long drum)
  PN 681123 (Std. drum – Clutch in left side)  /  PN 681347 (Long drum – Clutch in left side)
• Rated line pull: 3,630 kg / 8,000 lb (SAE J706 rating)
  3,560 kg (EN 14492-1 rating)
• Line speed (at 1st layer of rope) : 15 mpm at 60 l/min (49 fpm at 15.9 g/min)
• Operation pressure: 150 bar / 2,175 psi
• Max oil flow: 60 l/min (15.9 g/min)
• Hydraulic motor: 77.8 cm3/rev (4.7 in3/rev)
• Gear ratio: 2-stage planetary gear 16:1
• Winch construction: Aluminum die cast housings with steel drum
• Clutch (Freespooling): Rotating ring gear
• Brake: Spring applied drag brake together with over-center valve supplied
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 90 mm (3.5″)
• Drum flange diameter: 201.5 mm (7.9”)
• Distance between flanges: 190 mm (7.5″) – Std. drum
  253 mm (10″) – Long drum
• Mounting bolts pattern: 228.6 x 171.2 mm (9” x 6.7”) ; 311.2 x 114.3 mm (12.3″ x 4.5″) – Std. drum
  291.6 x 171.2 mm (11.5” x 6.7”) ; 374.2 x 114.3 mm (14.7″ x 4.5″) – Long drum
• Wire rope recommended:
  10 mm x 30.5 m (3/8″ x 100′) for Std. drum and 40 m (131′) for Long drum, 1,960 N/mm2 (EIPS) grade with a minimum breaking strength of 69.8 kN (15,663 lbf) required.for SAE J706 and EN 14492-1 ratings
• Winch weight: 35.5 kg / 78.1 lb – Std. drum
  37.5 kg / 82.7 lb – Long drum
• Gross weight: 43.3 kg / 95.3 lb  – Std. drum
  45.3 kg / 99.9 lb – Long drum
• Box dimension, (L x D x H) : 615 x 380 x 300 mm (24.2″ x 15″ x 11.8″)  – Std.drum
  665 x 370 x 285 mm (26.2″ x 14.6″ x 11.2″) -Long drumCompliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.
  * Drum freeboard shall be at least 1.5 x rope diameter

Performance Data: 

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.