YAK-7 Hydraulic car winch for 3175kg

Hydraulic winch 3175kg powered by an onboard hydraulic pump or PTO Fast and variable recovery speeds for high working rate.High efficient and constant-operating torque motor.An ergonomic T-handle for rapid wire rope payoutHeavy duty roller fairlead with grease zerk fittings

• 7,000 lb hydraulic worm gear winch
• Powered by an onboard hydraulic pump or PTO
• Fast and variable recovery speeds for high working rate
• High efficient and constant-operating torque motor
• Irreversible single stage worm gear provides instant braking and slip free operation
• An ergonomic T-handle for rapid wire rope payout
• Heavy duty roller fairlead with grease zerk fittings
• EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
• Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706

• Part number: PN 681260 (Std. drum)  / PN 681266 (Long drum)
• Rated line pull: 3,175 kg / 7,000 lb (SAE J706 rating)
  3,200 kg (EN 14492-1 rating)
• Line speed (at 1st layer of rope) : 5.2 mpm at 40 l/min (17.1 fpm at 10.6 g/min)
• Operation pressure: 110 bar / 1,595 psi
• Max oil flow: 40 l/min (10.6 g/min)
• Hydraulic motor: 48.6 cm3/rev (3.0 in3/rev)
• Gear ratio: 1-stage planetary gear 50:1
• Winch construction: Aluminum die cast housings with steel drum
• Clutch (Freespooling): Worm gear disengaged
• Brake: Irreversible worm gear
• Rotation of winch: Wire rope shall be under-wound orientation only
• Drum barrel diameter: 90 mm (3.5″)
• Drum flange diameter: 168 mm (6.6”)
• Distance between flanges: 160 mm (6.3″) – Std. drum
  240 mm (9.5″) – Long drum
• Mounting bolts pattern: 130 x 211 mm (5.1″ x 8.3”) – Std. drum
  130 x 291 mm (5.1” x 11.5”)  – Long drum
• Wire rope recommended:
  *10 mm x 10.7 m for Std. drum and 16.2 m for Long drum, 1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
  *3/8″ x 57.4′ for Std. drum and 87.3′ for Long drum, EIPS grade with a minimum breaking strength of 15,663 lbf required for SAE J706 rating
• Winch weight: 29 kg / 63.9 lb – Std. drum
  33 kg / 72.8 lb – Long drum
• Gross weight : 33 kg / 72.8 lb  – Std. drum
  37 kg / 81.6 lb – Long drum
• Box dimension, (L x D x H) : 431 x 386 x 256 mm (17″ x 15.2″ x 10.1″)  – Std.drum
  511 x 386 x 256 mm (20.1″ x 15.2″ x 10.1″) -Long drumCompliant with EN 14492-1 requirements for vehicle recovery winch:
  * The working coefficient for the first rope layer on the drum shall be at least 2.
  * The D/d ratio to the center of the rope shall be at least 10 for the drum.

Performance Data: 

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.