electric Pedestrian stacker with rider platform E-13GS & E-15GS 1300kg-1500kg 3000mm up to 4500mm stroke

• Pedestrian reach truck E-13GS and E-15GS with feed

The reach mast pedestrian stacker E-13GS and E-15GS also get there where other devices fail. Thanks to their feed, storage locations are reached where conventional pedestrian forklifts cannot drive under. With a maximum advance of 550 mm and a maximum lifting height of 4,500 mm, goods weighing up to 1.3 tons can be stored in high racks. The fork width can be manually adjusted from 200 mm - 720 mm, so that you can react flexibly to palletized goods or piece goods. The E-1345GS model is equipped with a triplex mast and has a free lift of 1,500 mm. The ergonomically shaped REMA drawbar is part of the standard equipment. You can choose between 1,300 kg and 1,500 kg for the load capacity.

• Feed

The reach mast pedestrian stacker is one of the predominant types in Europe. In the case of an electric pedestrian stacker with a feed or mast feed, the mast is located in the slide rails. These are housed in the wheel arms and allow the mast to move forward. Thanks to the reach mast principle, the mast can be moved directly to the shelf or the goods. This enables you to remove the goods from the shelves or to store them, even if the lower entrance is blocked or locked. The advantage of the reach mast pedestrian stacker can be clearly emphasized, especially in full high-bay warehouses or logistics centers.

• Choose your maximum fork height

The E-13GS and E-15GS pedestrian stackers are available in different mast versions. Starting with the smallest mast variation, with a maximum fork height of 3,000 mm, the largest model has a maximum fork height of a maximum of 4,500 mm. This makes the pedestrian stacker suitable for both smaller and larger warehouses. With a free lift of 1500 mm, the E-1345GS and E-1516GS pedestrian stackers are also ideal for loading and unloading trucks and containers. the E-1330GS model, on the other hand, has no free lift.

• quality and safety

The reach mast pedestrian stacker E-13GS and E-15GS are equipped with high-quality extras. Stopping on ramps, inclines or slopes is automatically supported by the brake and prevents the device from rolling away. When not in use, the E-13GS and E-15GS pedestrian stackers automatically switch to stand-by mode. The pedestrian stacker is driven by a powerful AC motor. A separate DC motor with the necessary power is used for the hydraulic pump and power steering. The E-13GS and E-15GS pedestrian stackers are also equipped with a practically replaceable battery system under the storage area between the tiller and mast. With the battery level and charge display including the operating hours counter, you always have everything at a glance and you are informed when the electric pedestrian forklift needs to be recharged.

• The tiller head is ergonomically shaped and is suitable for both left and right-handers. The pedestrian stacker can switch between forward and reverse gear with a rocker switch. During driving and maneuvering operations, the power steering ensures that the forklift truck is easy and comfortable to drive. The forks are raised and lowered using proportional levers. The lifting speed can be determined by pressing lightly or harder on the levers. Another lever can be used to tilt and lower the forks on the pedestrian stacker. The polyurethane rollers ensure pleasant and quiet work. In addition, they are abrasion-resistant and have extremely good traction. Ideal for sensitive or hard floors.